// vectors.c

/* To use, either add this file to the project file list (preferred), or 
 * #include it in a single source file if you are just using 
 * File->CompileToOutput (this works but using the Project feature is better
 */

/* As is, all interrupts except reset jumps to 0xffff, which is most
 * likely not going to be useful. To replace an entry, declare your function,
 * and then change the corresponding entry in the table. For example,
 * if you have a SCI handler (which must be defined with 
 * #pragma interrupt_handler ...) then in this file:
 * add
 *	extern void SCIHandler();
 * before the table.
 * In the SCI entry, change:
 *	DUMMY_ENTRY,
 * to
 *  SCIHandler, 
 */
#if defined(_HC12)
/* add any interrupt vectors in here too for HC12 paged compilation
 */
#pragma nonpaged_function _start
#endif

// function prototypes
extern void MDCOF_handler(void);
extern void KWU_handler(void);
extern void ADC_handler(void);
extern void SCI1_handler(void);
extern void SPI_handler(void);
extern void PAIE_handler(void);
extern void PAO_handler(void);
extern void TOF_handler(void);
extern void TC7_handler(void);
extern void TC6_handler(void);
extern void TC5_handler(void);
extern void TC4_handler(void);
extern void TC3_handler(void);
extern void TC2_handler(void);
extern void TC1_handler(void);
extern void TC0_handler(void);
extern void RTI_handler(void);
extern void IRQ_handler(void);
extern void XIRQ_handler(void);
extern void SWI_handler(void);
extern void COP_handler(void);
extern void CLM_handler(void);
extern void _start(void);			// entry point in crt12.s


#define DUMMY_ENTRY	(void (*)(void))0xFFFF

#pragma abs_address:0xffcc
//change the above address if your vector starts elsewhere

void (*interrupt_vectors[])(void) = 
	{
	/* to cast a constant, say 0xb600, use
	   (void (*)())0xb600
	 */
	/* 812A4 vectors starts at 0xff80, but most entries are not used 
	   if you use Key Wakeup H, change the start address to 0xffCE and
	   add one entry to the beginning */
	   
	MDCOF_handler,	/* MDCO */
	KWU_handler,	/* Key WU */
	DUMMY_ENTRY,	/* BDLC */			
	ADC_handler,	/* ADC */
	DUMMY_ENTRY,	/* RESERVED */		/* COM 1 */
	SCI1_handler,	/* SCI1 */
	SPI_handler,	/* SPI */
	PAIE_handler,	/* PAIE */
	PAO_handler,	/* PAO */
	TOF_handler,	/* TOF */
	TC7_handler,	/* TC7 */
	TC6_handler,	/* TC6 */
	TC5_handler,	/* TC5 */
	TC4_handler,	/* TC4 */
	TC3_handler,	/* TC3 */
	TC2_handler,	/* TC2 */
	TC1_handler,	/* TC1 */
	TC0_handler,	/* TC0 */
	RTI_handler,	/* RTI */
	IRQ_handler,	/* IRQ */
	XIRQ_handler,	/* XIRQ */
	SWI_handler,	/* SWI */
	DUMMY_ENTRY,	/* ILLOP */
	COP_handler,	/* COP */
	DUMMY_ENTRY,	/* CLM */
	_start			/* RESET */
	};
#pragma end_abs_address